Panel of regulation and control of the residual level of free chlorine in potabilization installations, pre-mounted on PVC panel.



  • Central control K800
  • IN-2604-04: Amperometric sensor Cu-Pt for free chlorine 0-5 ppm self cleaning
  • IN-2604-06: Potentiostatic sensor with membrane probe for free chlorine 0 – 2 ppm F-CL-5
  • pH Sensor
  • Sensors of methacrylate
  • Manual flow control valve
  • Drain faucet and sample collector
  • Flow Sensor
  • Serial port RS485 with MODBUS RTU protocol integrated
  • Power supply: 100 … 240VAC 50/60 Hz


The HW COCLOP dosing panel can be installed in a variety of facilities to obtain constant control and regulation of free chlorine and pH levels. The control is fully automatic and the values obtained are displayed clearly and legibly. Programming of limit values using alarms for each of the required parameters. The panels have a great flexibility of programming, which allows their use in a wide range of operating conditions.

The controller makes continuous measurements by means of an appropriate probe of the element to be regulated, sending a signal to the dosing pump that makes an injection or not, depending on the value obtained in the measurement and the limit values set by the operator .


Code: IN-2604-04/06

¿No has encontrado lo que buscas?

Dinos qué necesitas y responderemos tu mensaje lo más pronto posible :-)